All of our .025" (approx. 1/40") embossed aluminum diamond plate sheets ship rolled inside a compact box — this is completely
normal and expected. Use the two-step process below to flatten them, repeating as needed.
Step 1 — Back-roll to release the curl (start here first): After removing the sheets from the box, gently roll them in the
opposite direction from how they arrived (against the curl), using slow, careful back-and-forth motion with a large, gentle radius. Be careful not to make any sharp or tight bends, as this can crease or damage the sheet. This back-roll releases the bulk of the metal's rolled memory and is often all that is needed.
Step 2 — Weight them flat: Turn the sheets face-down with the tear-away PVC protective film facing down on a clean flat surface, then lay a sheet of drywall, OSB, or plywood on top. Let them rest for 24–72 hours to allow the sheets to continue relaxing flat.
If the sheets still have some remaining curl after Step 2, repeat both steps agai — back-roll gently first, then weight them flat again. Most sheets will come fully flat with one or two passes through this process.
► Pro tip: Many customers install sheets while they still have a slight remaining curl by starting from one edge and working across, letting the adhesive or fasteners hold each section flat as they go. If your project requires a flatter sheet before you begin, working through Steps 1 and 2 — repeated if needed — is the most reliable approach.
We offer 4'×10', 4'×8', and 2'×8' aluminum diamond plate sheets in four thicknesses, plus matching trim moldings and accessories — everything you need for a complete, professional installation. All diamond plate sheets come standard with a tear-away PVC protective film to protect the finish during transport and installation.
THICKNESS GUIDE:
.025" (approx. 1/40") — Embossed · Ships Rolled · BEST SELLER Our signature embossed aluminum diamond plate, roughly half
the thickness of a dime. Ideal for wall panels, wainscoting, garage walls, fitness centers, mechanical rooms, food trucks,
and decorative applications.
Colors: Gunmetal Gray, Traditional Polished, Gloss Black, Race Red.
.045" (approx. 3/64") — Flat-back · Ships on Pallets Non-embossed flat-back sheets approximately the thickness of a dime. Great for higher-traffic wall protection and trailer applications.
Finish: Traditional Polished anodized only.
.063" (1/16") — Flat-back · Ships on Pallets Non-embossed flat-back sheets with added durability. This is the thickest sheet compatible with our aluminum trim moldings.
Finish: Traditional Polished anodized only.
.125" (1/8") — Flat-back · Industrial Grade · Ships on Pallets Non-embossed flat-back sheets for heavy-wear and structural applications.
Finish: Traditional Polished anodized only.
We also carry aluminum trim moldings in lengths up to 8', corner guards, cover plates, fasteners, adhesives, and cutting tools.
► Note: Our aluminum trim moldings are compatible with diamond plate sheets up to .063" (1/16") thick only.
Diamond plate installs easily over a clean, flat substrate — drywall or plywood are the most common surfaces. All sheets come with a tear-away PVC protective film on the face. Leave it in place while handling, cutting, and installing to protect the finish, then peel it off the sheet surface once your installation is complete.
INSTALLATION METHODS:
★ MOST POPULAR — Construction adhesive — recommended adhesive product Most installers apply construction adhesive directly to the wall surface, then press the diamond plate panel into place starting from one edge and working across. Some installer prefer to apply adhesive to the back of the sheet instead — either method works well. You have a short window to adjust position before it sets, making it forgiving and easy to work with.
★ FASTEST & EASIEST — DeWalt Wall Dog screws. These black Wall Dog screws have wide, aggressive threads that anchor securely into drywall even if you miss a stud, and fasten cleanly into wood or metal studs when you hit one. Note that these are not self-tapping — drill a small pilot hole before driving each screw. Screws are a great choice if you'd ever want to remove a panel cleanly later. Some installers combine methods: using double-sided tape to tack the sheet in position first, then finishing with screws as they work across the panel.
★ TACKING & TRIM — 1" double-sided tape Double-sided tape is handy for holding trim moldings in position during installation or for temporarily tacking panels in place before screwing. It can also be used as a standalone fastening method for smaller accent pieces, though keep in mind it is a one-shot application — very difficult to reposition or remove once applied.
Trim moldings have a nailing flange so you can tack them withsmall finish nails or apply them with construction adhesive.Plan your trim placement before installing sheets — fittingcorner and edge trims first gives you a cleaner, moreprofessional finished look.
Check out our installation videos for step-by-step guidance.
Click here
Yes — custom cutting is available on all diamond plate sheetsand costs $15 per cut using our industrial 10-footguillotine-style metal shear. Our cutting tolerance is+/- 1/16".
• All cuts are straight 90° cuts only — we cannot cut holes, notches, angles, or custom shapes.
• Select your cutting option directly on the product page when adding sheets to your cart. Aluminum Diamond Plate Sheets - Wall, Trailer & Utility Grade The more detail you provide — dimensions, notes, or an uploaded sketch — the faster we can process your order.
• Each sheet product page includes a built-in cut list tool that instantly calculates the fewest number of cuts and sheets needed for your project. Enter your project dimensions there before adding to cart.
1.Aluminum Diamond Plate Sheets - Wall, Trailer & Utility Grade
• After entering your cuts, you can choose to have leftover remnant pieces shipped with your order or left behind. This option is selected on the product page when adding your cuts.
Standard orders ship within 2–3 business days from ourGolden, CO facility.
.025" (approx. 1/40") rolled sheet orders: Ship via FedEx or UPS Ground in our custom compact box. Most customers receive their order within 3–5 business days after it ships.
Flat sheet & wholesale pallet orders — .045" (3/64"), .063" (1/16"), .125" (1/8"): Ship flat on extended-length pallets or crates via LTL freight, typically within 5–7 business days after processing. Because these pallets exceed 96" in length, they are classified as excessive length freight and liftgate delivery is not available. A loading dock or forklift is required at the delivery address — please confirm your receiving capabilities before ordering. If a dock or forklift is not available at your location, we can arrange for your shipment to be held for pickup at the nearest freight carrier distribution facility.
► Rush Processing: Select Rush Processing at checkout to move your order to the front of the line and guarantee next-business-day processing. If we can't meet that commitment, we'll refund your rush fee — no questions asked.
Track your order anytime from our TrackYour Order page.
Shipping costs are based on product weight, order size, anddelivery address type, and are always displayed before youcomplete checkout.
• Residential addresses carry a slightly higher carrier surcharge than commercial or business addresses for FedEx and UPS Ground shipments.
• .025" rolled sheet orders ship via FedEx or UPS Ground. Costs are calculated at checkout based on total weight and destination zip code.
• Flat sheet & wholesale pallet orders ship via LTL freight on extended-length pallets or crates exceeding 96". Rates vary by distance and freight class, and liftgate delivery is not available. Get an exact quote at checkout or submit a Quote Request [LINK NEEDED] for complex orders. If a loading dock or forklift is not available, we can arrange pickup at the nearest freight carrier distribution facility.
• Free shipping is available on qualifying orders shipped to the contiguous 48 states, including: – Embossed .025" (approx. 1/40") diamond plate sheets – Aluminum trim moldings up to 7'10" in length – Corner guards up to 7'10" in length Free shipping does not apply to .045", .063", or .125" flat sheets, custom cuts, moldings over 7'10", or any wholesale orders.
► Note: Exact shipping costs are always shown before checkout. For unusual locations or complex orders, submit a freight
quote request. Click here
Yes — and anyone can qualify. No business license or accountis required. Wholesale pricing is available on purchases of20 or more sheets or 20 or more trim moldings.
• Shop directly in our Wholesale for instant wholesale pricing.
• Our longer trim molding lengths and thicker flat sheets — .045" (3/64"), .063" (1/16"), and .125" (1/8") — are available exclusively through the wholesale section.
• Wholesale sheet orders ship on extended-length pallets or crates exceeding 96" via LTL freight, typically within 1–2 weeks but up to 4 weeks depending on inventory. Liftgate delivery is not available — a loading dock and forklift are required. If neither is available, we can coordinate pickup at the nearest freight carrier distribution facility.
• Wholesale orders are not eligible for free shipping and are subject to freight shipping charges. We will contact you after your order is placed to coordinate freight and delivery details.
For large, recurring, or complex orders, submit a Wholesale Inquiry and our team will assist with custom pricing and logistics.
Visit the Track Your Order , enter your order number and email address, and you'll see live tracking for FedEx, UPS, or LTL freight shipments.
You'll also receive a shipping confirmation email as soon as your order leaves our Golden, CO facility. If you need help locating your tracking details, reach out through our Contact Us or call us at 303-500-7209.
⚠ 72-HOUR DEADLINE — NO EXCEPTIONS
All damage claims must be reported within 72 hours of delivery. Inspect your order immediately upon arrival — do not set it aside for later.
When your order arrives:
• Inspect the exterior of the box immediately. If visibly damaged, note it on the carrier's delivery receipt before signing.
• Open and inspect the contents the same day.
• Retain all packaging — box, interior wrap, end caps, and packing materials — until your claim is fully resolved.
To file a claim, email returns@onlinediamondplate.com within 72 hours with:
• Your order number
• Clear photos of the shipping box and all damaged material being claimed
• A written description of the damage to each item
► Important: Keep all original packaging until the issue is fully resolved. Claims without adequate photo documentation may be denied. For full details, see our Shipping & Returns Policy.
Absolutely — local pickup is available at our Golden, Colorado facility and is a great option for large or heavy flat sheet orders where you'd like to avoid freight shipping costs.
How pickup works:
• Place your order online and select local pickup at checkout.
• Most pickup orders are processed and ready within 1–2 business days.
• Once your order is ready, our team will email you a confirmation along with a lock code for our Diamond Plate Shed.
• The Diamond Plate Shed is located in front of our building at 13200 W. 43rd Dr., Unit 104, Golden, CO 80403 and is accessible 24/7 — pick up your order at any time, day or night, at your convenience.
• No appointment needed — just use the lock code from your email to open the shed.
To ask questions in advance, use our Contact Us or call us at 303-500-7209, Monday–Friday, 9 AM–5 PM.
► Heads up: If picking up flat pallet orders, make sure you have a vehicle or trailer large enough to transport 4'×8' or 4'×10' sheets.